Brother SX-4000 - Manual (Page 40)

REPLACING THE RIBBON. ETC.
Replacing the cassette daisy wheel
The daisy wheel is housed in a clear plastic cassette for easy, damage-free
handling and quick typeface changes.
To replace the cassette daisy wheel:
1) open the top cover.
2) Pull the lever towards you to release the
daisy wheel lock.
3) Remove the cassette daisy wheel by pull­
ing it out of the machine by the protruding
“ear" on the top right.
4) Insert the desired cassette daisy wheel
into the slot and press down gently.
5) Slide the lever back to its original position
to lock the cassette daisy wheel in place.
Make sure to press the lever firmly.
6) Close the top cover.
7) Press [CODE] + IRESETl (Q) to move the
carrier to the previous position.
Make sure the cassette daisy wheel is not
inserted backwards. The “ear” should
always be on the upper right.
Improper insertion of the cassette daisy
wheel may cause malfunction and incorrect
printing.
It is not necessary to remove the cassette
ribbon when replacing the daisy wheel.
NOTE Please check the shape of your daisy
wheel cassette before replacing the daisy
wheel. The daisy wheel cassette type B
cannot be used with this machine.
Type A TypeB
38