Problem, Troubleshooting – Brother SX-4000 User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
TROUBLESHOOTING
Problem
Problem
Solution
Nothing happens when power
switch is turned on
1. Is the power cord plugged in?
Poor printing performance
or printout is impossible
1. Is the daisy wheel properly installed?
(Has the lever been pressed firmly?)
2. Have you run out of ribbon?
3.
Try to press [CODEI + [RESETl (Q) to
detect the home position of the carrier.
Poor correction performance
1. Has the correction tape been properly
installed?
2. Have you run out of correction tape?
3.
Are you using the proper correction
tape?
4.
Try
to press [CODE] + [RESET] (Q) to
detect the home position of the carrier.
39
Advertising