Pioneer PD-207 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
© Output Cable x 1
@ Control Cable x 1 (PD-107 only)
@ AAA dry cell batteries x 2 (PD-207 only)
® Remote control unit x 1 (PD-207 only)
PUT BATTERIES INTO THE REMOTE
CONTROL UNIT (PD207 only)
1. Open the rear cover.
2. Install AAA batteries, correctly matching polarities.
3. Close the cover.
NOTES:
• In order to prevent battery leakage, remove the batteries when not
using the remote control unit for an extended period (one month or
more). If leakage occurs, carefully wipe away any battery fluid inside
the compartment, and replace the batteries with new ones.
•
Do not allow books or other objects to rest on top of the re
mote control unit, since the buttons may be depressed, causing
fas ter exha us tion of the ba tteries.
Incorrect use of batteries may cause leakage or rupture.
Always be sure to follow these guidelines:
A. Always insert batteries into the battery compartment correctly
matching the positive © and negative © polarities, as shown
by the display inside the compartment.
B. Never mix new and used batteries.
C. Batteries of the same size may have different voltages,
depending on the brand. Do not mix different brands of
batteries.
<REMOTE CONTROL OPERATIONS>
When operating the remote control unit, point the unit's infrared
signal transmitter at the remote control receiver on the front panel
of the player. The remote control unit can be used within a range
of about 7 meters from the remote sensor, and within angles of up
to about 30 degrees.
FRONT PANEL
© STANDBY/ON switch and STANDBY indicator
@ TIME button
© COMPU/AUTO EDIT button
© Remote sensor (PD-207 only)
Receives the signal from the remote control unit.
® Disc tray
® Digit buttons (PD-207 only)
(1
-
10
, >
10
)
@ RANDOM button
® REPEAT button
® HI-LITE scan button
® DISPLAY OFF button
© OPEN/CLOSE button (^)
® Play/Pause button (►/!!)
® Track/Manual search buttons
(!◄◄ ◄◄ /►► )
© Stop button (■)
© PROGRAM button
® Headphones jack (PHONES) (PD-207 only)
® Headphones volume control (LEVEL)
(PD-207 only)
Note for PD-207:
If the remote control sensor window is in a position where it
receives strong light such as sunlight or fluorescent light, control
may not be possible.
Note for PD-107:
Operate the PD-107 using the remote control unit which accompa
nies the amplifier. (See page 4.)
<XRB1002>