Brother CM-2000 - Manual (Page 96)

Frame and Line Drawing
Drawing A Tabular Grid
FRAME
ranuAi
In order to draw a tabular grid, your typewriter needs to know, not only the position of
the top left and bottom right comers of the frame, but also where the internal, horizontal
and vertical lines of the grid will be.
1. Begin in the same way as fordrawingasimple frame, by movingthe carriage to the point
where you want the top left comer of the frame (A), and pressing the [FRAME] key,
if you want the top line of the frame to be a double line, press [SHIFT] + =.
2, Now move the camiage down to the position of the first, internal, horizontal line of
the grid, (B) and press [SHIFT] + _ (underline) for a single line, or [SHIFT] + =s for
a double line.
3, Repeat this procedure for all the horizontal lines of the grid,
4, Now move the carnage right, to the position of the first, internal, vertical line of the
grid (E), and press the key for the vertical framing character (|),
5. Repeat the procedure for every (internal) vertical line in the grid,
6. Now move the carriage to the bottom right-hand comer of the grid, and press the
[FRAME] key, followed by the [RETURN] key, as before.
The grid will be printed, and the camiage will return to the top left-hand comer of the grid.
[FRAME] ^
(OPTIONAL)
i
i
i
OR =
_OR as
_OR^
1
B
c
D E
E ___________. G
[FRAME]