Kenmore 1232 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
©
1,
Release
clutch
by
turning
clutch
knob toward you,
2,
Draw
thread
from
spool
through
bobbin
winder
tension
disc
as
shown.
3,
Pull end of thread through hole in
bobbin as shown.
4,
Place bobbin onto bobbin winder
shaft
with
end
of
thread
coming
from the top of the bobbin. Push
bobbin
winder
shaft
to
the
right
until it clicks, Holding onto end of
thread, start machine. When bobbin
is
slightly
filled,
snip
off
end
of
thread,
5. Start machine. Wind thread until
bobbin winder shaft releases,
6. Tighten clutch knob and remove
bobbin.
Advertising