Fcc notice – Brother EM-430 User Manual

Page 2

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Please record in the blank space below the MODEL NO. and SERIAL NO. ofthis typewriter. The

MODEL NO. and SERIAL NO. are located on the back of the typewriter.____________________________

MODEL NO.:

SERIAL NO:

Please keep these numbers in a safe place for future reference.

FCC NOTICE

This equipment generates and uses radio frequency energy and if not installed and used properly,

that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio

and television reception. It has been type tested and found to comply with the limits for a class

B computing device in accordance with the specifications in Subpart J of Part 15 of FCC Rules, which

are designed to provide reasonable protection aginst such interference in a residential installation.

However, there is no guarantee that such interference to radio ortelevision reception, which can

be determined by turning the equipment on and off will be avoided. The user is encouraged to

try to correct the interference by one or more of the following measures:

= Reorient the receiving antenna

- Relocate the computer with respect to the receiver

- Move the computer away from the receiver

- Plug the computer into a different outlet so that the computer and receiver are on different

branch circuits. If necessary, the user should consult the dealer or an experienced radio/television

technician for additional suggestions. The user may find the following booklet prepared by the

Federal Communications Commission helpful: “Howto Identify and Resolve Radio-TV Interference

Problems’’. This booklet is available from the US Government Printing Office, Washington, D.C,

20402, Stock No. 004-000-00345-4.

THE EQUIPMENT MUST BE INSTALLED NEAR THE SOCKET OUTLET, WHICH MUST BE

EASILY ACCESSIBLE.

Advertising
This manual is related to the following products: