Character correction – Brother EM-430 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advanced Typing
Character correction
To use automatic correction, move to the character you wish to correct, using the
[SPACEBAR]
or
[BKSP]
key.
J 1 ; i i ' f " e l e i
------------A
When the carrier is directly over the characterto be corrected press the
[CORRECT]
key. The character will be erased and the carrier will remain in that ^position.
If you want to erase more characters to the left of the one you just erased, press the
[CORRECT]
key again.
You may type the correct character(s), or move on, as necessary.
/A
Notes:
1. The automatic correction function works on bold, subscript, superscript, dead, and
underlined characters.
2.
If you superimpose two characters for any reason, the automatic correction works on
only the second character. The first character should be corrected manually.