Brother EM-430 - Manual (Page 32)

Advanced Typing
Expand
REPEAT
EXPAND
The expand function doubles the amount of space between characters typed in any pitch.
To place yourtypewriterin theexpand mode, hold down the [CODE] key and press the
[EXPAND] key.
The EXPAND LED will light while holding down the [CODE] key as a reminderthat you
are in the expand mode.
Yourtypewriter is released from the expand mode by holding down the [CODE] key and
pressing the [EXPAND] key once again.
This letter was typed to show you just some of the
perform.
In fact, you have seen some of these features already in
be easily done with this typewriter.
RETURN
IND CLR
Carrier Return
Yourtypewriter features both manual and automatic carrier return.
Manual carrier return
Pressing the [RETURN] key returns the carrier to the left margin and
advances the paper by the number of lines set with the [LINE] key
(L I 1/2, 2).
Hot zone
The Hot Zone is an area that begins 6 spaces (regardless of pitch) before the right margin
and extends to the right margin. A buzzer will sound as the carrier enters the hot zone
to inform you of the fact. Once the buzzer has sounded to warn you, you have the six
spaces of the hot zone to end your line by splitting the last word with a hyphen or by
moving the word to the next line, if necessary. If you continue to type, the carrier will stop
at the right margin and the keyboard, except forthe carrierreturn, will lock. This is to keep
you from typing on past the margin, unless, of course, you use the margin release function
to continue.