D. water flow through the filter valve, Fast rinse cycle, Service tech. information – Kenmore TANNIN 625.348261 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SECTION 5
SERVICE TECH. INFORMATION
D. WATER FLOW THROUGH THE FILTER VALVE
FAST RINSE CYCLE
ROTOR & DISC
During FAST RINSE, the rotor & disc is positioned so water flow enters the resin tank through the
top distributor, and exits through the bottom distributor, to the drain.
The timer again energizes the motor to return the valve to
service,
and as the valve rotates, the
position switch lever drops to open the circuit. The valve remains positioned in service until the
timer initiates the next regeneration.
5-7
Problems, Questions? Call 1-800-426-9345 Kenmore Water Line
Advertising