Kenmore TANNIN 625.348261 - Manual (Page 7)

SECTION 1 WATER FILTER START UP
2. SET DAYS TO RECHARGE
C. PROGRAM THE TIMER
3. SET RECHARGE TIME
This setting is the number of days the fitter wiit go
between recharges. The defauit setting is 2 days,
with a maximum setting of 99.
b.
Press the UP or DOWN buttons untii the cor­
rect number of days between recharges is
shown in the dispiay.
Press the SETECT button once to set the days
to recharge and advance to the next set up
screen.
See the chart beiow to determine the frequency of
recharges. Find the number of peopie iiving in the
househoid, and then going across the chart, find
the number of days that the fitter shoutd be set for
The fitter is factory set to begin recharge at 12:00
AM. If a different recharge time is desired, or
needed, do the foiiowing.
a. Press the UP or DOWN buttons untii the cor­
rect recharge time is shown in the dispiay.
b. Press the SETECT keypad once to set the re­
charge time and return the dispiay to the nor-
mat operating screen with the present time of
day shown.
recharges.
Regeneration Tabie
Number of Peopie in
Househoid
Days to Recharge
setting
1 - 3 3 days
4 - 6 2 days
7- 10 1 days
1-4
Problems, Questions? Call 1-800-426-9345 Kenmore Water Line