Kenmore TANNIN 625.348261 - Manual (Page 4)

SECTION 1 WATER FILTER START UP
A. SAFETY GUIDES
^ Read all steps, guides and rules carefully before installing and using
your new water filter. Follow all steps exactly to correctly install. Failure
to follow them could cause personal injury or property damage. Reading
this book will also help you to get all of the benefits from your water filter,
^ Your tannin filter will remove tannins from your water supply as de­
scribed on page 4-2. Also see the specifications on page 4—1. It will
not soften hard water, purify contaminated water, or make other unsafe
water safe to drink. The tannin removal resin will foul or deteriorate if
supply water exceeds any of the limitations as specified on page 4-1.
Pretreatment my be needed.
^ Protect the filter and piping from freezing. Damage from freezing
voids the filter warranty. See page 3-3.
^ Connect the filter to the house COLD water (120° max.) pipe only.
DO NOT CONNECT TO HOT WATER. Hot water will damage Inner parts
and weaken or break the tank.
CAUTIONS
PLEASE READ AND COMPLY WITH THE FOLLOWING GUIDES TO
PREVENT DAMAGE TO THE FILTER OR OTHER PROPERTY PER­
SONAL INJURY, OR POSSIBLE FATAL SHOCK.
A THIS FILTER WORKS ON 24 VOLTS ONLY BE SURE TO USE
THE TRANSFORMER INCLUDED, AND PLUG IT INTO A
GROUNDED 120V OUTLET.
A Unplug the transformer right away if the power cable should
become damaged or frayed. Make repairs before plugging back
into the power outlet.
A Always unplug the filter from electrical power before removing
outer valve covers.
European Directive 2002/96/EC requires all electrical and elec­
tronic equipment to be disposed of according to Waste Electrical
K and Electronic Equipment (WEEE) requirements. This directive or
similar laws are in place nationally and can vary from region to
region. Please refer to your state and local laws for proper disposal of
this equipment.
1 - 1
Problems, Questions? Call 1-800-426-9345 Kenmore Water Line