Connecting the units, E sub-woofer phase/stereo-monaural switch, Stereo-monaural switching – Pioneer CD-625 User Manual
Page 3: Phase switching, O sub-woofer level control, Sub-woofer phase/stereo-monaural switch
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting the Units
e Sub-woofer phase/stereo-monaural switch
Allows switching of the phase of the sub-woofer speaker and
stereo-monaural switching of the sub-woofer output. Choose
stereo-monaural, before phase switching.
Stereo-monaural switching
Switch to STEREO for stereo output and to MONO for monaural
output. MONO provides the same sound to "L" and "R" sub
woofer terminals. Choose output suitable to your amplifier and
sub-woofer speaker.
Phase switching
Usually this switch is left in the NOR (normal) position. Set to the
REV (reverse phase) position to switch the phase to accommodate
for speaker position and music type.
O
Sub-woofer level control
Allows adjustment of the output level of the sub-woofer speaker.
Use this control to adjust the low range of the output.
Before making final connections, make temporary connections
then operate the unit to check for any connecting cord prob
lems.
Refer to the owner's manual for details on connecting the unit
to the RCA pin jacks of a car stereo or to a power amplifier, then
make connections correctly.
This unit can only be connected to a car stereo with RCA pin
jacks.
Connecting the Units
&
Sub-woofer phase/stereo-monaural switch
Allows switching of the phase of the sub-woofer speaker and
stereo-monaural switching of the sub-woofer output. Choose
stereo-monaural, before phase switching.
Stereo-monaural switching
Switch to STEREO for stereo output and to MONO for monaural
output. MONO provides the same sound to "L" and "R" sub
woofer terminals. Choose output suitable to your amplifier and
sub-woofer speaker.
Phase switching
Usually this switch is left in the NOR (normal) position. Set to the
REV (reverse phase) position to switch the phase to accommodate
for speaker position and music type.
O
Sub-woofer level control
Allows adjustment of the output level of the sub-woofer speaker.
Use this control to adjust the low range of the output.
Before making final connections, make temporary connections
then operate the unit to check for any connecting cord prob
lems.
Refer to the owner's manual for details on connecting the unit
to the RCA pin jacks of a car stereo or to a power amplifier, then
make connections correctly.
This unit can only be connected to a car stereo with RCA pin
jacks.