Brother MFC-4820C - Manual (Page 10)

step 1
A
Setting Up the MFC
On/Off Play/Reeord Erase
@ О О
Speaker u ., h Redial/
Phone Pause
О О О
Menu/Set Stop/Exit Dial Pad Fax Start
Selecting a Receive
Mode
Choose the Receive mode which best suits your
needs.
O Press the Menu/Set key.
2 Press d) key.
3 Press CD key.
O Press CD key.
5 Press to select the mode.
3 Press Menu/Set key.
7 Press the Stop/Exit key.
Do you want to
receive a fax
automatically?
No "^
Yes
r
You control the phone line and
must answer every call yourself.
Do you use the MFC
for the fax use only? Yes ^
INo
1
The MFC automatically
answers every call as a fax.
L_____
- -►
The MFC controls the line
and automatically answers
every call. If the call is not a
fax, it will ring for you to pick
up the call.
Setting Up the Message
Center
You must record an outgoing message in order to use
the Message Center mode.
O Record Message Center Outgoing
Message (MSG CTR OGM).
See “Recording Message Center Outgoing
Message” in Chapters of the User’s Guide.
2 Activate Message Center mode.
Press and hold^^ until it lights and the
LCD shows:
Lights
If the Message Center Mode is ON, it over
rides your Receive Mode setting. The
built-in digital Message Center answers
voice calls. If the call is a fax, you can
receive a fax automatically.
For more details, see “Message Center” in
Chapters of the User’s Guide.
For more details, see “Setup Receive” in
Chapter 5 of the User’s Guide.