Attaching the paper tray, Step 1, 3 setting up the mfc – Brother MFC-4820C User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
o Remove the protective tape.
Q
Do NOT connect the USB cable.
Connecting the USB cable is done
when installing the driver.
Attaching the Paper Tray
o Insert the paper tray from above into the
back of the MFC.
You can load up to 100 sheets of 20 lb
(75 g/m
2
) paper.
For more details, see “Paper Capacity of
the Paper Tray” in Chapter 2 of the User’s
Guide.
o Fan the stack of paper well to avoid paper
jams and misfeeds.
2
Unfold the paper support and then press
and slide the paper guide to fit the paper
width.
3 Gently insert the paper.
Make sure the print side is towards you and
the paper is below the maximum paper
mark.