Brother MFC-4820C - Manual (Page 8)

step 1
A
Setting Up the MFC
B
Color Block Quality and
Alignment Check
O After the cleaning cycle is finished, the LCD
shows;
2 Make sure the paper is loaded in the paper
tray.
Press the Fax Start key.
3 The MFC starts printing the PRINT
QUALITY CHECK SHEET (only during
initial ink cartridge installation).
Check in Step A
Check in Step B
Step A: Color Block Quality
Check
O The LCD shows:
Check the quality of the four color blocks
formed by the short lines printed on the
sheet.
(BLACK/CYAN/YELLOW/MAGENTA)
2 If all lines are clearand visible, press the ®
key on the dial pad to go to STEP B:
Alignment Check.
—OR—
If you can see missing short lines, press the
(T) key on the dial pad and go to 3.
OK Poor
3 The LCD asks you if the print quality is OK
for each color. Press the® key or® key
on the dial pad.
When you have finished selecting the ®
key (YES) or the ® key (NO) for each
color, the LCD shows:
Press the ® key (YES), and then MFC
starts cleaning the colors.
After cleaning is finished, press the
Fax Start key. The MFC starts printing the
PRINT QUALITY CHECK SHEET again
and goes back to the first step of STEP A.