Crestron electronic TPS-17B/W - Manual (Page 38)

Tilt Touchpanels Crestron Isys ® TPS-12B/W, TPS-15B/W & TPS-17B/W
Video Setup Details – Video, S-Video and Component (Continued)
VIDEO SETUP
SCREEN
CONTROL
DESCRIPTION
Overscan These controls adjust the amount of video information at the
edges of the image. This part of the video picture is usually
beyond the display capabilities of the screen.
None Sets the video screen so there is no overscan. The amount
of used screen area is smallest in this configuration.
Normal Sets the video screen for normal overscan. This results in
more area of the screen being used.
Max This sets the video screen area to the maximum. The
screen area is largest in this configuration. All video
information at the edges is visible.
1. Video default is zero (0) for each of the video parameters (brightness, contrast, saturation and hue).
2. Adjustment applies to the currently selected video source only.
3. Hue is not available with component video.
Diagnostics Menu
The Diagnostics button from the MAIN MENU contains controls for diagnostic
tools. The diagnostic tools should only be used under supervision from a Crestron
customer service representative during telephone support. The options available from
the DIAGNOSTICS MENU are numeric in nature and their interpretation is beyond
the scope of this manual.
DIAGNOSTICS MENU
34 • Tilt Touchpanels: TPS-12B/W, TPS-15B/W & TPS-17B/W Operations Guide – DOC. 6464A