Crestron electronic TPS-17B/W - Manual (Page 42)

Tilt Touchpanels Crestron Isys ® TPS-12B/W, TPS-15B/W & TPS-17B/W
QM-TX QuickMedia Transmitter
The QM-TX QuickMedia Transmitter can be used to connect a video or audio source
to a QuickMedia network without a locally available QM transmitter (such as the
QM-WMC).
The QM-TX accepts composite video, S-video, component video and audio signals.
These signals are encoded and converted to the QuickMedia standard and fed over a
CAT5E or CAT6 cable to a QM receiver (such as the TPS-12B/W, TPS-15B/W &
TPS-17B/W). All signal routing occurs automatically under the command of the
control system.
For more information, refer to the latest version of the QM-TX Operations Guide
(Doc. 6334).
Tilt Angle Tension Adjustment
Use a 5/32 inch socket (not included) with a hex drive key (Allen wrench) to
increase or decrease pivot tension at the base of the touchscreen. Turning the key
clockwise increases tension, counterclockwise decreases tension.
Tension Adjustment Screw
Tilt Tension Adjustment
Use a 5/32" Hex (Allen) Wrench
Recommended Cleaning
Keep the surface of the touchscreen free of dirt, dust or other materials that could
degrade optical properties. Long-term contact with abrasive materials can scratch the
surface, which may detrimentally affect image quality.
For best cleaning results use a clean, damp, non-abrasive cloth with any
commercially available non-ammonia glass cleaner. Bezels may not provide a
complete watertight seal. Therefore, apply cleaning solution to the cloth rather than
the surface of the touchscreen. Wipe touchscreen clean and avoid getting moisture
beneath the bezels.
38 • Tilt Touchpanels: TPS-12B/W, TPS-15B/W & TPS-17B/W Operations Guide – DOC. 6464A