Crestron electronic TPS-17B/W - Manual (Page 26)

Tilt Touchpanels Crestron Isys ® TPS-12B/W, TPS-15B/W & TPS-17B/W
Setup Menu
To obtain the SETUP MENU press the Setup button from the MAIN MENU. The
SETUP MENU offers a series of buttons which open additional menus and displays
and are detailed in subsequent paragraphs. The SETUP MENU also provides
Down/Up buttons to control Screen Brightness, Key Backlight and Standby Timeout.
The Hardkey Test Results indicators will light when each respective button is pushed
on the touchpanel. After setup parameters have been selected, select the Return
button to return to the MAIN MENU.
NOTE: For convenience the current CRESNET ID setting is displayed in the upper
left corner.
NOTE: All touchpanel settings are automatically saved in non-volatile memory.
SETUP MENU
Interface Menu
The touchpanel communicates with a control system to activate commands or to
display feedback from components within the system. The communication interface
must be correctly specified or communication will not occur. To set communication
parameters select the Interface button located on the SETUP MENU and display the
INTERFACE MENU, shown after this paragraph.
The Cresnet network identity number (CRESNET ID also known as the Net ID) is
displayed on the INTERFACE MENU. Net ID is the two-digit hexadecimal number.
The hexadecimal number can range from 03 to FE and must correspond to the Net
ID set in the SIMPL Windows program of the Cresnet system. Matching IDs
between touchpanel and SIMPL Windows program is required if data is to be
successfully transferred. Net ID for the TPS-12B/W, TPS-15B/W & TPS-17B/W is
factory set to 03. No two devices in the same system can have the same Net ID.
22 • Tilt Touchpanels: TPS-12B/W, TPS-15B/W & TPS-17B/W Operations Guide – DOC. 6464A