For your safety read before operating, Operating instructions – Louisville Tin and Stove WOW253 User Manual
Page 12
FOR YOUR SAFETY READ BEFORE OPERATING
WARNING: If you do not follow these instructions exactly, a fire or explosion may result
causing property damage, personal injury or loss of life.
A.
This appliance does not have a pilot. It is
• If you cannot reach your gas supplier, call
equipped with an ignition device which
the fire department.
automatically lights the burner. Do not try
to light the burner by hand.
C.
Use only your hand to push in or turn the gas
control knob. Never use tools. If the knob will
B.
BEFORE OPERATING smell all around the
not push in or turn by hand, don’t try to repair
appliance area for gas. Be sure to smell next
it, call a qualified service technician. Force or
to the floor because some gas is heavier than
attempted repair may result in a fire or explosion.
air and will settle on the floor.
WHAT TO DO IF YOU SMELL GAS:
D.
Do not use this appliance if any part has been
• Do not try to light any appliance.
under water. Immediately call a qualified service
• Do not touch any electric switch; do not
technician to inspect the appliance and to
use any phone in your building.
replace any part of the control system and any
• Immediately call your gas supplier from a
gas control which has been under water.
neighbor’s phone. Follow the gas supplier’s
instructions.
OPERATING INSTRUCTIONS
1.
STOP! Read safety information on this label.
2.
Set the thermostat to the lowest setting.
3.
Turn off all electric power to the appliance.
4.
This appliance is equipped with an ignition device which automatically lights the burner. Do not try to light the burner
by hand.
5.
Turn gas control knob clockwise
to “OFF”. Do not force.
6.
Wait five (5) minutes to clear out any gas. If you smell gas, STOP! Follow “B” in safety information on this label. If
you don’t smell gas, go to next step.
7.
Turn gas control knob counterclockwise
to “ON”.
8.
Turn on all electric power to the appliance.
9.
Set thermostat to desired setting.
10.
If the appliance does not operate, follow instructions “To Turn Off Gas To Appliance” and call your service technician
or gas supplier.
1.
Set the thermostat to lowest setting.
2.
Turn off all electric power to the appliance if service is to be performed.
3.
Turn gas control knob clockwise
to “OFF”. Do not force.
TO TURN OFF GAS TO APPLIANCE
Page 12
Gas control knob shown
in “OFF” position