Kenwood RC-R0905 - Manual (Page 11)

lC3
I ■
1
f* :I v - ìs > m ÌIÌ‘
=%v(.
iOBS'-
RC-R0905 iEn]
Select where the macro should be stored.
It
Press the VIDEO, AUDIO, or TV
key to select the macro location.
(MACR01, 2, and 3 respectively)
AUDIO
VIDEO /"“N TV o Q o
• You can store up to 3 different macros, one at eacn key
VIDEO -* "MACRO r, AUDIO "MACRO 2", TV -* "MACRO 3"
• The backlight flashes once wnen you select the macro location.
• Pressing a button otne^ than VIDEO. AUDIO, or TV cancels the macro
program mode.
When VIDEO is Dressed
sp O
BOOM f3
l\/I I
I I I
Press the keys to be operated in order.
■ This example shows you how to create a macro that: turns on the TV,
sets the TV to the appropriate input, selects the receive^' s input
selector to LD, and turns on the LD player. AH you have to do is insert
the laser disci
' In order to allow verification of the remote control mode, the name of
the selected input appears in the receiver’s display when the VIDEO,
AUDIO or TV key is pressed When the VIDEO or AUDIO key is
pressed the receiver's input also changes.
Terminate the macro program mode.
Press the MACRO key so that the
backlight flashes twice.
MACRO o
■ The macro is stored at the locations soecitied m step 3. If another macro
was previously stored at The same location, it is erased.
Repeat steps B through B to program up to 3 macros.