Using component video, Connecting your dvd player (better) – Vizio VT470M User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Component Video
Connecting your DVD Player (Better):
VIZIO VT420M/VT470M User Manual
i 11 Up j
1.
Turn off the power to the LCD HDTV and DVD player.
2.
Connect the Y (green color) connector on your DVD player to the corresponding Y (green
color) connector in the Comp 1 group (yellow color area) at the rear of the LCD HDTV.
3.
Connect the PbCb (blue color) connector on your DVD player to the corresponding PbCb
(blue color) connector in the Comp 1 group (yellow color area) at the rear of the LCD HDTV.
4.
Connect the PrCr (red color) connector on your DVD player to the corresponding PrCr (red
color) connector in the Comp 1 group (yellow color area) at the rear of the LCD HDTV.
5.
Using an audio cable (white and red connectors), connect the cable to the audio output
connectors associated with the Component output on your DVD player and connect the other
end to the audio connectors associated with the Comp 1 input (yellow color area) at the rear
of the LCD HDTV.
6.
Turn on the power to the LCD HDTV and DVD player.
7.
Select Comp 1 using the INPUT button on the remote or side of the LCD HDTV, or directly by
pressing the COMP button on the Remote Control.
Note:
•
If you are already using the Comp 1 input for another component, or you do not want to use the
Comp 2 input for the DVD player, you can connect the DVD player to the Comp 2 connections at
the rear of the TV.
•
Refer to your DVD player user manual for more information about the video output requirements
of the product.
■ J»
24