Connecting an external receiver/amp – Vizio VT470M User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VIZIO VT420M/VT470M User Manual
Connecting an external Receiver/Amp
If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical
DIGITAL AUDIO OUT (white area) at the rear of the TV. This is active when receiving audio with the
programs being viewed no matter what input is being used.
®
® d'i ®
1.
Turn off the power to the HDTV and Receiver/Amp.
2.
Using an audio cable (optical cable), connect the cable to the audio input connectors on the
Receiver/Amp and connect the other end to the OPTICAL OUT (white area) audio connectors
at the rear of the LCD HDTV.
3.
Turn on the power to the HDTV and
Receiver/Amp.
4.
Then press the MENU/SELECT button on
the remote control to bring up the On
Screen Display (OSD) menu.
5.
Press ▼ button on the remote control to
select the Audio menu.
6.
Press ► on the remote control to enter the
Audio sub-menu. Press the ▼ button to
highlight SPEAKERS.
7.
Press MENU/SELECT key to select Off so
that the sound from the TV will now be
routed through your Receiver/Amp system.
8.
Press EXIT key to exit the menu display.
1
1
■■■
I
SB
H
Note:
•
Refer to your Receiver/Amp user manual to select the corresponding audio input.
•
The audio output is not amplified and cannot be connected directly to external speakers.
28