Vizio VT470M User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VIZIO VT420M/VT470M User Manual
\ «
7
’ :
8
.
If your Time Zone observes the daylight
savings, the next display will give the choice
to select or no select it. Highlight your choice
and press MENU/SELECT button to confirm
your selection.
At this point if you have an outdoor antenna
or use a cable service (No set-top box), the
signal source can be selected.
Press
A
or
T
to select your input source
(Antenna or Cable), then press
MENU/SELECT button to confirm it. The
scanning of the channels will start.
9.
The Channel Scan progress screen opens if
you selected Scan. At this point if you are
using a cable or satellite set-top box, please
press MENU/SELECT button to exit this
process and use your cable box to select the
channels.
If you select Stop Scan, you can scan channels
at a later time by selecting Channels menu, and then
and select the Scan Channels option in the menu.
10. If you let the TV finishing the channel scan,
the next screen will give the option to continue.
11. At this point, you can either let the TV do the
final two steps automatically or press the
MENU/SELECT key to continue and finish this
procedure.
to get information
about availability in your area, antenna types, and in which direction to point your antenna. The channel
availability through cable depends on which channels your cable operator supplies in Clear QAM. Consult
your cable operator for more information.
32