Preparation, Press so tiiat the “pgm' indicator tights, F-'gm – Kenwood CD-323M User Manual
Page 15: Select the disc, Select the track number, Pgnu:l. d200
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Use the following procedure to select desired tracks (up to
32 tracks) from different discs and program them in the
desired order.
Preparation
(Load discs in the carousel.
(Set the CD player to stop mode.
CD-323M [En)
Press
SO
tiiat the “PGM' indicator tights.
F-'GM
L„
hi :
*-.i ■
Select the disc.
\ I /
pi3M0 jr3i:'200
•When the disc corresponds to CD-TEXT, orwhen the disc title has been
registered, the disc title will be displayed with scrolling. Discs can be
selected by the disc title.
"Registration of Title"
—
• If you make a mistake, press the CLEAR key and enter the disc No. from
the beginning.
Select the track number.
PGNu:l. D200
^
----------------------------------- !!!=----------------I
•To program the entire disc, press the SET key without inputting the
track number. "ALL" will be displayed.
• Program other tracks in the desired order by repeating steps B and B.
• Up to 32 tracks can be programmed. "FULL" is displayed when no
more tracks can be programmed.
• If you make a mistake, press the CLEAR key and restart from step B.
•Tracks will be played in the order they are programmed.
•When the or ►» key is pressed during playback, the track will be
skipped in the direction of the pressed button.