Connection to digital amplifier or md, Connection to a general-use amplifier, System control connections – Kenwood CD-323M User Manual
Page 7: System control operations, System connections
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CCK323M (En)
I
Connection to digital amplifier or MD
Connect the DIGITAL OUT (COAXIAL) ¡ack to the digital input jack
of the amplifier, DAT recorder, MD recorder, etc., using a coaxial
cable which are commercially available in audio stores.
Connection to a general-use amplifier
Use the provided audio cords to connect the OUTPUT jacks of this
unit to the CD input jacks (or AUX jacks) of the amplifier.
SYSTEM CONTROL CONNECTIONS
Connecting system control cords after connecting a KENWOOD
audio component system lets you take advantage of convenient
system control operations.
There are two KENWOOD system control modes. Make connec
tions according to the groups of terminal symbols shown below.
[XS8I Mode
[SUeiMode
lets you combine DfiJ, CXS, and 0CSH‘ terminals
forSLEI terminals only
This unit is compatible with both [XS81 and [SL16] modes.
Select the mode according to the connected components.
SL16 XS 8
Amplifier or receiver
This unit
□
Cassette deck or MD
□ e -,CJ
eDo this operation after completing all connections.
{Ensure that the power plug is not connected.)
1. If your amplifier or receiver does not have a system control
terminal, do not connect any system control cords to the
system control terminals on the other components.
2. Do not connect system control cords to any components
other than those specified by KENWOOD. It may cause a
malfunction and damage your unit.
3. Be sure the system control plugs are inserted all the way
in to the system control terminals.
jjlllltcc
SYSTEM CONTROL OPERATIONS
Remote Control
Lets you operate this unit with the system remote control unit supplied with the amplifier or receiver.
Automatic Operation (Except [XR] equipment)
Automatically switches the input selector on the amplifier or receiver when you start playback from this unit.
Synchronized Recording (Except [XR] equipment)
Lets you synchronize recording with the start of playback when recording from a CD. Also, the simple CCRS operation enables great recordings from
CDs,
See the operating instructions supplied with your cassette deck for details.