Kenwood CD-323M User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
CD-323M [En]
Make connections as shown below.
When connecting the related system components, refer
also to the instruction manuals of the related components.
Do not plug in the power iead until all connections are com-
pieted.
8e sure to use this unit placed on a level surface.
Malfunction of microcomputer
If operation is not possible or erroneous display
appears even though all connections have been
made properly, reset the microcomputer refer
ring to "In case of difficulty".
Digital component (MD,DAT, etc.)
1. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet, Plugging/unplugging
connection cords without removal of the power cord can cause malfunctions or damage to the unit.