V.e.t. switch & operation chart – Uniden VS2000XR User Manual

Page 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

V.E.T. SWITCH & OPERATION CHART

Valet Mode is useful when unloading groceries, or servicing the car. To activate the

valet mode, turn the ignition key on and press the V.E.T. switch once. Mow the alarm
will not arm. If you wish to deactivate the valet mode, turn the ignition on and press
the V.E.T. switch once. Mow the alarm can he armed.

Emergency disarm is a back-up method of disarming the alarm in case the

transmitter is lost or stolen. To disarm the alarm, first open a door. The alarm will

begin to sound. Turn the ignition key on and then press the V.E.T. switch once.

Temporary disarm can be used to temporarily disarm the alarm if the alarm Is

programmed for automatic arming. This is useful when leaving the car for a short
period of time such as during a stop at a gas station. To operate, turn off the ignition
key and press the V.E.T. switch once before opening any door. If you change your
mind and wish to leave the car for an extended time, press the transmitter button to
arm the alarm. The temporary disarm feature is automatically disengaged once the
ignition is turned on.

V.E.T.

SWITCH

FUNCTIONS

Valet

V: Mode

P, Emergency

disarm

__ Temporary

'" disarm

ACTIVATE
VALET

DEACTIVATE
VALET

EMERGENCY
DISARM

TEWIPORARY(ITIME)

DISARM OF AUTOMATIC
ARMING [SEE NOTE U£}

STEP 1

DISARM THE
ALARM

TURN IGNITION

SWITCH ON

THE ALARM IS
ALREADY ARMED

DISARM THE ALARM

STEP 2

TURN IGNITION

SWITCH ON

PRESS V.E.T,
SWITCH ONCE

OPEN DOOR
(SIREN WILL
SOUND)

TURN IGNITION

SWITCH FROM ON

TO OFF

STEP3

PRESSV.EX
SWITCH ONCE

TURN IGNITION

SWITCH OFF

TURN IGNITION

SWITCH ON

PRESS V.E.T.
SWITCH ONCE
(NOTE 4)

STEP 4

TURN IGNmON

SWITCH OFF
ALARM iS NOW IN
VALET MODE

ALARM CAN NOW
EE ARMED

PRESS V.ET. SWITCH
ONCE. ALARIv! IS
DISARMED

LEAVE CAR. ALARM

WILL NOT ARM FOR
THIS ONETIME

ONLY

LED

STATUS

LONG FU^SH ON
^NOTE 3)

led

JS OFF

LED 13 OFF

LED IS OFF

NOTE 1; AUTOMATIC ARMING - Alarm will arm automatically 15 seconds after the last door

is shut. However, if you wish, you can arm the alarm manually after the last door is
shut, by pressing the transmitter button once.

NOTE 2: Two ways to remove the 'lemporary disarm of automatic arming" feature:

(1) Close ail doors and press the transmitter button once. The alarm will "chirp"

and arm.

(2) Turn the ignition key from off to on, then back to off. The alarm will go back to the

“automatic arming" mode.

NOTE 3: When the VS2000XR is fully armed, the LED vdli flash 0.5 second on, 1.5 seconds

off. When in valet mode, the LEO will flash 1.5 seconds on, 0.5 second off. This

protects the car in valet mode, as a thief v/ili see the Hashing LED and assume the
alarm is armed.

.

NOTE A: Press the V.E.T. switch once before opening any door.

Advertising