Receiving broadcast station, Q select the broadcast band, Select a tuning mode – Kenwood DVR-6100 User Manual
Page 21: Q select a station p.call (preset call), Auto (auto tuning), Manual (manual tuning), Select the tuner input, Select the broadcast band, Select a station p.call (preset call)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Receiving broadcast station
It is also possible to receive them by one-touch operations
by storing up to 30 stations in the preset memory. ( -»
2
^)
DVR-605/DVR-6100/DVR-6100K (EN)
BAND
Select the TUNER input
[MAIN UNITI
I REMOTE
c
□-
[
BAND I
-cv*
Q
Select the broadcast band
I MAIN UNITI
TOP MENU/BAND
Select a tuning mode
REMOTE I
AUTO/MONO
When using the main unit, press INPUT repeatedly to select
the tuner. When the BAND key on the remote is pressed, this
unit will be switched on automatically.
Tuning indication
Auto tuning mode indication------------ I ^__________Stereo tuning indication
AUTO TUNEO ST
Preset number Band display Frequency display
Each press changes the band.
FM
AM
Each press switches the mode
© auto tuning mode
^ ©manual tuning mode
-Lit
When the
TUNE
keys are pressed in AUTO mode, a station will be
tuned in automatically and tuning will stop. Stereo reception will be
made
automatically
when
a
stereo
broadcast
with
sufficient
signal
strength is received.
Q
Select a station
P.CALL (preset call)
I MAIN UNITl
I REMOTE |
AUTO (auto tuning)
I
remote
"|
MANUAL (manual tuning)
I REMOTE 1
TUNE/rV VOL.
TUNEATV VOL.
©O
Press the !•<-< , keys to select a
preset station.
Press the TUNE key to receive the
next tuned station automatically
Each time a key is pressed, the frequency
is changed by one step.
When a key is pressed continuously, the
frequency changes continuously.
Use the manual tuning mode when re
ception is noisy due to weak reception.
(In the manual mode, stereo broadcasts
are received in monaural.)