Kenwood DVR-6100 - Manual (Page 67)

casa
0f diffisultf I
DVR-605/DVR-6100/DVR-6100K (EN)
DVD/ CD player unit
Symptom Caui<! Remedy
The viewing angle cannot be changed. • The DVD disc being played does not contain
the recording of more than one angle,
• You are attempting to switch the angle in a
DVD section where more than one angle is
not recorded.
• The viewing angle cannot be changed when
the DVD disc being played does not contain
the recording of more than one angle. —f3l1
• More than one viewing angle may be re­
corded only in limited sections in a disc.
A disc can not be played although the
region code is displayed as [ALL],
• Some discs can not be played in all regions
even when [ALL] is displayed
• Play a different disc.
Playback will not start even after a
title is selected.
• A viewing restriction (Parental level) has
been set for the disc.
• Check the viewing restriction level (Paren- —
tal level) setting.
The viewing restriction level (RAT­
ING) cannot be changed.
• You have forgotten the viewing restriction
(Parental) password.
• Set the initial setup to the factory setup with
the following procedure.
With no disc in the unit, press the PLAY/
PAUSE (►/iDkey. After "NO DISC" is dis­
played, press the DVD CD key, cursor ►
key, •< key, T key, ▲ key on the remote and
I-« key on the main unit in this order.
Press the POWER switch to OFF and press
the POWER switch again to ON.
The voice or subtitle language selected
in the initial setting is not played.
• The DVD disc being played does not contain
the recording of the selected voice or sub­
title language
• Use a DVD disc containing the recording of
the selected voice or subtitle language.
No message appears on the TV screen
after a key is pressed.
• The function for displaying message on the
TV screen is set to off
• Set On-screen function to on.
Menu screen messages are not shown
in the desired language.
• The menu language function (MENU) is not
set.
• Set the disc menu language function (MENU)
as required.
Inhibition icon
Symp ••
1
Remedy
The inhibition icon is dis-
1 J played and remote control is
V- y not possible.
• Playback is restricted intentionally by the
software producer.
• The operation is inhibited- Please try an- —QB
other operation.
Apparatus Claims of U S Patent Nos, 4,631,603, 4,577,216, 4,819,098 and 4,907,093 licensed for limited viewing uses only.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineer­
ing or disassembly is prohibited.
Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the
picture. In case of 525 progressive scan picture probiems, it is recommended that the user switch the connection to the "STANDARD DEFINITION"
output. If there are questions regarding our TV set compatibility with this model 525p DVD player, please contact our customer service center.