Uniden UBC 175xL - Manual (Page 6)

DISPLAY
Your Uniden® Bearcat® 175XL has an 8-digit backlighted display which indi­
cates the channel and frequency being monitored as well as lockout, delay,
priority, weather (WX) search and memory loss (fig, 3). All of the functions of
the display will be discussed in detail later in the programming section.
Memory Channel
Number
Frequency
ir> MH7
PROGRAM KEYS
Numeric keys 0 through 9 and □ are used to program the frequencies into
your scanner. allows frequencies to be entered into the 16 memory chan­
nels for scanning.
OPERATION KEYS
Provides a 3 second delay on any channel to receive a reply
transmission before resuming search or scan. Delay is retained
in memory,
LIMIT I Enters two selected frequencies as upper and lower search limits.
Also when receiver is stopped on a signal in the search mode,
LIMIT permits manual searching lower in frequency, one frequen­
cy at a time. Search limits will be retained in memory.
SHCH
I
Starts search operation.
HOLD I Stops search. Also when receiver is stopped on a signal in the
search mode, HOLD permits manual searching higher in frequen­
cy, one frequency at a time.