Crestron electronic ST-PC - Manual (Page 15)

Crestron ST-PC Dual AC Power Control Module
C2Net Device, Slot 9
Setting the Net ID in Device Settings
Double-click the ST-PC icon to open the “Device Settings” window. This window
displays the ST-PC device information. If necessary, select the Net ID tab to change
the Net ID as shown in the following figure.
ST-PC “Device Settings” Window
NOTE: SIMPL Windows automatically changes the Net ID values of a device
added to a program if a duplicate device or a device with the same default Net ID
already exists in the program. Always ensure that the hardware and software settings
of the Net ID match. For Net ID hardware setting details, refer to “Identity Code” on
page 7.
Operations Guide – DOC. 5708A Dual AC Power Control Module: ST-PC • 11