Chauvet 1200E - Manual (Page 12)

Setup
-8- Legend™ 1200E Spot User Manual Rev. 03c
Mounting Before mounting this fixture, read and follow the safety recommendations indicated in
the Safety Notes section (page 2 of this manual).
Orientation Always mount this fixture in any safe position while making sure that there is adequate
room around it for ventilation, configuration, and maintenance.
Make sure to mount this fixture away from any flammable material as indicated in the
Safety Notes section.
Rigging The Legend™ 1200E Spot comes with two omega brackets and two clamps. You will
have to use two mounting points per fixture. You can also mount the Legend 1200E
Spot on the floor or any other firm, horizontal surface. CHAUVET® recommends
following the general guidelines below when mounting the Legend™ 1200E Spot.
• When selecting an installation location, consider ease of access to the fixture for
operation, programming adjustments, and routine maintenance.
• Never mount the fixture in places where rain, high humidity, extreme temperature
changes, or restricted ventilation may affect it.
• If hanging this fixture, make sure that the location where you are mounting the
fixture can support its weight. Please see the Technical Specifications section of this
manual for the weight requirement of this fixture.
Only mount this fixture where the base is in a horizontal position, either hanging
or standing, as indicated in the diagram below. Doing otherwise may cause
damage to the fixture and void its warranty.
Product Mounting
Diagram
Safety Cable Installation
Diagram
Standing
position
Standing
position
Hanging
position
Safety
cable
Omega
brackets
with clamp
s