Device setup, Pick device type, Pick device brand – Vizio M470NV User Manual
Page 43: Confirm remote connection
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VIZIO M470NV/M550NV User Manual
Device Setup
This feature allows you to add devices to your HDTV and control them
with your VIZIO remote control. This feature was also available during the
initial Setup App. Note: The feature is not available in TV mode. Once the
input source is changed from TV to the selected device input, the remote
will control that device. Note: this option is not available when the Input
Source is set to TV.
Input Source
Select the input source your device is connected to on your HDTV.
Choose from TV, AV (Composite), Comp (Component), HDMI-1,
HDMI-2, HDMI-3, HDMI Side, and RGB (VGA).
Pick Device Type
Select the type of device that is connected to your HDTV. Choose
from VCR, DVD Player, Blu-Ray Player, Satellite Receiver,
Cable Box, or DVR.
Pick Device Brand
Select the brand name of the device that is connected to your
HDTV. The brand names will vary based on the device type
selected above.
Confirm Remote Connection
Automatically program the VIZIC remote control to allow it to
control your device.
1. Turn the device on.
2. Point the VIZIC remote directly at the device.
3. Press OK to select Confirm Remote Connection. The
TV will attempt to communicate with the device.
4. Point the VIZIC remote at the device and the press the
Input power button. The device should turn off. If it does,
select It worked and press OK. If it does not power off,
select Try the Next Code. Repeat until you find a code
that works.
Pick Device Type
Pick Device Brand
Version 6/28/2010
43