Network menu, Wired connection, Change settings – Vizio M470NV User Manual
Page 48: Test connection, Wireless connection
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VIZIO M470NV/M550NV User Manual
•5 N t! tWC5 r k C
0
n n 5 C t i
0
fi
Wired Connection
Network Menu
When you first turned on your HDTV you set up your network connection using the Setup App. If you did
not do this or if your setup has changed, you can do this from the Network menu.
The Ethernet function on your HDTV is used to access the Internet. Your HDTV also has 802.11n
wireless, so you can connect your TV to the Internet through your wireless home network. A wired
connection may deliver a more consistent connection depending on the conditions in your home
environment. When you enter the Network Menu you will see your current connection method.
Wired Connection
View that your wired connection is set to Connected. This is not an option
that you can adjust. It is for information only.
Manual Setup
Select to view and/or manually change your network settings.
Change Settings
Select to manually change your network settings such as the IP
Address, the Subnet Mask, the Default Gateway, the Preferred
DNS Server, and the Alternate DNS Server.
Warning: unless you are an advanced user and are comfortable with
wired and wireless networks, do not adjust these settings.
Test Connection
Select this option to test your network connection.
Wireless Connection
Wireless Access Points
If there is no wired connection, the
wireless menu will be displayed and
you will see a list of available wireless
networks. You will also see that your
Wired Connection is set to
Disconnected.
Please enter your Access point
name. This is useful for locating
an Access Point with a hidden
SSID
LinKsys
Smith family
^ .tSi
t '
^ »si
n
^
aS
Jones fafTiily
Mora Access Pcints
Manual Seti-ip
1. Press
T
to select your wireless
network, and then press OK. If you
do not see your wireless network
in the list, seiect More Access
Points and then press OK.
2. If the network is password
protected, enter the secure access
code you created when setting up
your wireless router. Slide the
remote control open and begin
typing in the code. You can also select Show Keyboard and use the on-screen keyboard
instead of the remote control. When you are finished entering the code, select Connect.
Help
Text,
{Will
grow upwards
automatically if multi lined)
If you have forgotten your secure access code, please refer to the user manual for your
wireless router or contract the manufacturer or either your router or your Internet Service Provider if
they provided the router for you.
48