Kenwood DM-VH7 - Manual (Page 17)

I
Editing Editing
This procedure shows you how to play and move
a track to the track number you desire. The sur­
rounding tracks are renumbered automatically.
Repeating this procedure lets you arrange the
tracks in the order you desire.
Preparation Play the track to be moved.
PLAY
Moving the order of the track being played in a disc (MOVE)
Select "MOVE "
O Press the EDIT key.
tut I _
© Select "MOVE".
GD c ; d
© Set it.
at: I
Select the moving destination track.
O Select the track number.
To decrease
track No.
© Set it.
I-«-«
CD CD
To increase
track No.
! 3 tl ^
This operation is also possible during play-pause.
Each press of the or keys switches the operation.
(0 DIVIDE
(2) COMBINE
(3) ERASE
4) MOVE
Editing is aborted if no operation has been performed for
8 seconds.
Example for moving between tracks No. 6 and No. 7
Track to be moved
Destination track
No.
♦
Move the track.
Display after execution
"EDIT NOW" : Editing
"COMPLETE" : When editing is completed suc­
cessfully
"CAN'T EDIT" : When editing is impossible
• When this operation has been performed unintention­
ally, return to the status before editing can be made by
"EDIT CANCEL" operation. ' -LfflJ
Eject the Mini Disc.
ejecy^,^
Main unit only
WRITING-
/ / I \ ^
Information is
being written.
EJECT
Mini Disc has been
ejected.
While "WRITING" is displayed, do not im-
pact or move the unit because information
about recording and editing is being writ­
ten to the Mini Disc.
To delete the edited contents (EDIT CANCEL)
When the following key operation is performed before the minidisc is removed, return is possible to the
same condition as when the disc was inserted. After cancellation, again perform the individual editing
operations.
Operate in stopped condition.
O G
EDIT
CANCEL CIM I cn ENTER
ok ?
• Note that the editing results cannot be canceled if any recording is performed before ejecting
the MD or after "UTOC ERROR" has been displayed.