Kenwood DM-VH7 - Manual (Page 19)

Editing Editing
Use the following procedure to divide a track into
two by inserting a track number in its middle. For
example, by inserting an additional track number
before the passage you are specially fond of, it is
easy to skip to there when you play the disc later.
Note that the track numbers of the tracks located
afterthedividedtrackareautomatically
incremented.
The preview function can be used for fine adjust­
ment while repeatedly listening to the track division
point.
Dividing a track during playback (DIVIDE)
Play the track to be divided.
Press the EDIT key at the desired position.
O Press the EDIT key
EDIT
©Select "DIVIDE"
© Set it
GD CD
SET
If no preview is to be performed, press the
ENTER key once and then go to step □.
When preview is to be performed.
O Preview execution
SET
© Perform fine adjustment of the division
point.
CD CD
© Decide the division point.
SET
Q Execute the track divide operation.
• This operation is also possible during play-pause.
Each press of the m or keys switches the operation,
a) DIVIDE
( 2 ) COIMBINE
(3T ERASE
® MOVE
Editing is aborted if no operation has been performed for
8 seconds.
♦
Up to 255 track numbers can be inserted
additionally by repeating □ to □ for each
of them.
Eject the Mini Disc.
Display after execution
"EDIT NOW" : Editing
"COMPLETE" : When editing is completed suc­
cessfully
"CAN'T EDIT" : When editing is impossible
• When this operation has been performed unintention­
ally, return to the status before editing can be made by
"EDIT CANCEL" operation.
-|3£
• There is no blank space left between the two tracks.
• Track division may sometimes be impossible due to the
limitations of the MD standard.
VIA'
/ / T \"\
Information is
being written.
i
Mini Disc has been
ejected.
Repeated playback from the division point will be per­
formed for about 3 sec.
jWhile "WRITING" is displayed, do not im-
iS’oip pact or move the unit because information
about recording and editing is being writ­
ten to the Mini Disc.
\ I //
mu ''
PREWIEN 0s
Image of preview
r
Point selected by fine adjustment of dividing point
Playback for 3 sec
I The dividing point can be fine-adjusted in 60 ms (6/100
sec.) steps, between -31 and +31 assuming that the
point where the
EDIT key was pressed is 0 (i.e. in the
range covering about 4 seconds),
A IT
-31 0 +31
Fine adjustment range