2 gtlock, 3 receipt on/off switch – Toshiba TEC FDS-30 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
E01-11032
4.2 GTLOCK
GTX
GTZ
This lock is provided to read or reset the accumulated sales totals
not on the daily but on weekly or monthly basis. This lock will not
be used for any other purpose than report takings.
GTX Position may be accessed by the GTX Key or GTZ Key.
GTZ Position may be accessed by the GTZ Key only.
(Further instructions as to the GT Lock are in the
MANAGER’S GUIDE).
N O T E :P ie ase se t
the GT
lock to the ne u tra l p o sitio n (m a rke d w ith w ith th e G T X o r
G T Z ke y re m o ve d w h e n re p orts a re n o t b e in g take n .
4.3 RECEIPT ON/OFF SWITCH
RECEIPT
ON
OFF
This switch has two positions available -- 'OFF’ position and ‘ON’ position. When
in the ‘OFF’ position, no receipt is issued from the register and sales are printed on
the journal roll only. When the switch is set to the ‘ON’ position, sales are printed
on both receipt roll and journal roll, then a receipt is issued which is automatically
cut off and given to the customer.
- 4 -