Toshiba TEC FDS-30 - Manual (Page 131)

EO-11032
On depressing [SI/TL], “-0.30” (which is 10% discount from the total amount of Dept.5 + Dept.6
items) is displayed and printed, and that amount is subtracted from the sale total. (4.77-0,30 = 4.47)
FOREIGN CURRENCY EXCHANGE RATE SETTING
In this program, the rate of each foreign currencies (corresponding to the [CUR1] to [CUR4] keys)
will be set. By setting a rate on each Foreign Currency Key, reading the sale total and tendering in
the foreign currency value will be possible for sale finalization.
Any time outside a sale
Mode Lock: SET / GT Lock: Neutral
Exchange Rate for Foreign Currency 1
I
0.000001 to 9999.999999
(Use the [.] key if decimal portion is
contained in the rate.)
■> [CURI]
I
Exchange Rate for Foreign Currency 4
I [CUR4]
As for how to calculate the Exchange Rate, see the description below.
Foreign Currency Exchange Rate Calculation
1. The rate must be calculated in the subsidiary currency unit values for both the domestic
and the foreign currencies. (In case of calculating the rate from the domestic to a foreign
currency with the same zero-suppress form, such as from US $ to French Franc, it will be
no problem even if it is calculated in the main currency of $ and Franc. However, in case
of exchanging from a domestic currency such as $ or Franc to Japanese yen or Italian
Lira, or vice versa, this rule must be obeyed; otherwise a wrong rate will result.)
2. Calculate the required foreign currency value equivalent to the domestic currency value
”1”. Then the obtained value is the Exchange Rate value to be entered in the setting
operation stated above.
If the domestic currency is US $:
10 = xxxx.xxxxxx centimes (French Franc)
= xxxx.xxxxxx pfennigs (Deutsche Mark)
= xxxx.xxxxxx yen (Japanese yen)
Enter this value as the foreign currency rate.
- 65 -