Character entries – Toshiba TEC FDS-30 User Manual
Page 96
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
E01-11032
CHARACTER ENTRIES
As already stated, there are two methods of operations for character settings for names or messages:
CHARACTER CODE ENTRY Method and DIRECT CHARACTER ENTRY Method.
CHARACTER CODE ENTRY METHOD
This method Is to set a character by entering a Character Code and depressing the [#] key.
Input from the ECR keyboard only is possible (not possible from the PK-2)
DIRECT CHARACTER ENTRY METHOD
•
Flat Keyboard with the “Setting Mode Key Layout” template.
•
PK-2 Keyboard (Menu Code-preset Keyboard ; hardware option)
By using the character keys on those keyboards, the characters are directly entered. In this
manual, sample operations are attached to most of the programming operations. And at
name or message programming portions, character entries are shown in the DIRECT
CHARACTER ENTRY method. For example, instead of merely pressing the character key
“A”, keys can also be indexed as 401 [#J (To enter the character “A”) on the above two
keyboards.
On the following pages. Character Code Tables under the CHARACTER CODE ENTRY Method
and two different keyboards under the DIRECT CHARACTER ENTRY Method are shown. These
pages are to be referred to, every time the “Character Entries” sequence is contained in various
programming operations in this manual.
Read through these pages at least once first, so that you may know the appropriate method of
character entries using the ECR keyboard and/or option keyboard.
- 3 0 -