RCA VR725HF - Manual (Page 10)

Hooking Up the VCR
Connecting IWo VCRs for Copying Tapes
□
Option A hookup.
Use this hookup for a simple connection
which requires fewer accessories.
1. Select a hookup from pages 2 through 5
and then modify with this connection.
2. Set the 3 CH. 4 switch on the playback
VCR to either channel 3 or 4.
Tune the recording VCR to this channel to
receive the signal from the playback VCR.
3. Connect as shown.
This connection may require additional
accessories not provided.
4. Plug in power cords of VCRs and TV.
5. Continue to page 10.
Option B hookup.
Use this hookup for slightly improved copy
quality and more convenient operation —
use of the TV»VCR button is not required.
1. Select a hookup from pages 2 through 5
and then modify with this connection.
2. Connect as shown.
This connection requires additional accessories
not provided.
If your other VCR has an S-VIDEO connector,
also connect the supplied S-VHS cable to take
advantage of S-VHS.
If your VCR is not stereo, you may need a
Y-adapter to hear sound from both channels.
3. Plug in power cords of VCRs and TV.
4. Continue to page 10.
Select the line (audio/video) input ("L1" or
"L2") on the recording VCR to receive the
signal from the playback VCR.
Caution: The unauthorized recording of
television programs and other materials
may infringe the rights of others.
Front View for front
audio/video input connection.
VIDEO 1: For rear audio/video connection.
VIDEO 2: For front audio/video connection.
8
From Antenna, Cable
or Cable Box
......
RF Coaxial Cable
(supplied)
RF Coaxial Cable
AudioA/ideo \ ^
Cables ^ «k. ^
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
P
Playback VCR (only)
Video In Audio In (UR)