Recording audio only, Recording a program – RCA VR725HF User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording a Program
Recording Audio Only
You can record audio only from another audio source connected to the AUDI01 or AUDI02 IN (L
and R) jacks on the back of the VCR.
To Record Audio Only
(Refer to hookup on page 9.)
1
.
3.
4.
Press the INPUT button on remote until the line
indicator “L1 (Rear connection)" or "L2 (Front
connection)" appears in the VCR's display panel.
Then, the VCR records audio from the audio
equipment connected to the AUDI01 or AUDI02
IN jacks.
Use SPEED on the remote to select the
recording speed.
The tape speed indicator appears in the VCR's
display panel and on the TV screen.
Start playing the audio source and press REC on
remote or RECORD on the VCR to begin recording.
The record indicator (E
ec
)) and the playback
indicator (►) appear in the VCR's display panel.
Press STOP*EJECT on the VCR or STOP on the
remote when you are finished.
32