Controlling a cable box or an rca dss® receiver, Program the remote, Operate the cable box or satellite receiver – RCA VR725HF User Manual

Page 20: Using the remote control

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Using the Remote Control

Controlling a Cable Box or an RCA DSS® Receiver

Tht; CABLE button on the VCR's remote is preprogrammed to control either a compatible
RCA cable box or satellite receiver. If your cable box is another manufacturer's brand and
has its own remote, you will probably be able to program the VCR's remote to control your
cable box. To program the VCR's remote, enter the code that corresponds to your brand.

Program the remote

1. Turn on the cable box.

2. Point the VCR remote at the

cable box.

3. Hold the CABLE button and

press two number buttons to
enter the code for your brand.

4. Release the buttons.

5. Press POWER on the remote.

If the cable box turns off,
setup is complete.

6. Repeat steps 2-4 with a

different code if the first one
does not work.

Brand of Cable-TV Box or RCA DSS®

Code Number(s)

ABC

53,54

Anvision

07,08

Cablestar

56

Diamond

07,08

Eagle

07,08

Eastern International

02

General Instrument

04, 05,15, 23, 24, 25, 30, 36

Hamlin

12,13, 34,48

Hitachi

37,43

Jerrold

04, 05,15, 23, 24, 25,30, 36, 45,46,47

Macom

37,43

Magnavox

07, 08,19, 26, 28, 29, 32, 33,40,41

NSC

09

Oak

01,16,38

Oak Sigma

16

Panasonic

03,27, 39

Philips

07, 08,19, 26, 28, 29, 32, 33,40,41

Pioneer

18,20,44

Randtek

07,08

RCA

60,27

RCA DSS®

00

Regal

12,13

Regency

02,33

Samsung

44

Scientific Atlanta

03, 22, 35

Stargete2000

58

Sylvania

11,59

Teknika

06

Texscan

10,11,59

Tocom

17,21,49,50, 55

Unika

31,32, 41

Universal

51, 52

Viewstar

07, 08,19, 26, 28, 29, 32, 33,40, 41

Warner Amex

44

Zenith

14,42, 57

The remote may not be able to control every cable box of the
brands listed.

Operate the Cable Box or Satellite Receiver

After you set up your remote (if required) to control your cable box, test the buttons to see
which ones operate your cable box or satellite receiver.

1. Point the remote at the cable

box or satellite receiver and press CABLE.

2. If the cable box or receiver does not turn on in step 1, press CABLE, then POWER.

3. Use the "Cable Box or RCA Digital Satellite Receiver Function Buttons" for the cable box

and test the "TV Function Buttons" to see which ones operate the satellite receiver.
See page 15.

*

*DSS® is a registered trademark of DIRECTV, Inc., a unit of GM Hughes Electronics.

18

Advertising