RCA VG4038/ VG4039 - Manual (Page 14)

Using the Remote Control
Controlling a VCR
The VCR's remote controls two compatible GE, RCA, or ProScan VCRs with the
VCR1 and VCR2 buttons. Most compatible VCRs automatically respond to VCR1
without being programmed. If you own two compatible VCRs, test them to see if
VCR1 turns on both VCRs. If it does, then you may want to program this VCR to
respond to the VCR2 button on the remote.
Program the VCR for remote control
Set the Remote Control feature of the VCR to the VCR1
or VCR2 position. The remote then controls the VCR
with either the VCR1 or VCR2 button — whichever
position you select in the menu.
A. Press MENU«PROG to display the VCR MAIN
MENU.
B. Press 5 to display SETUP OPTIONS.
C. Press 2 to activate the Remote Control feature.
D. Press VCR1 or VCR2 to change the setting and
program this VCR to respond to the VCR1 or VCR2
button — whichever you select.
Important Reminder: Remember you must |
press VCR1 or VCR2 on the remote -
whichever you selected in the menu -
before the remote wiU operate this VCR.
VCR MAIN MENU
1 VCR PLUS+ Programming
2 Timer Programming
3 Review Programs
4 Channel Setup
3 VCR Setup Options
SETUP OPTIONS
1 VCR Plus+ Setup
2 Remote Control; VCR1
3 Auto Play; ON
Press VCR2 to change
SETUP OPTIONS
1 VCR Plus+ Setup
2 Remote Control: VCR2
3 Auto Play: ON
0 Exit to Hain Menu
Controlling a TV
The VCR's remote is preprogrammed to control the basic functions of a compatible
GE, RCA, or ProScan TV.
Operate the TV
Test the TV buttons to see which ones may operate
your TV.
A. Point the remote at the TV and press TV.
B. Use the "TV Buttons" as described on page 11.
Helpful Hint: Notice the difference!
between the TV and VCR on-screen
displays. This is one way to tell if the
remote is set to control the VCR or the TV.
12