Trouble checks, Tvvuble here's what to try – RCA VG4038/ VG4039 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
References
Trouble Checks
TVvuble
Here's what to try:
Rewind does not operate
Timer recording not made
or wrong program recorded
Incorrect time dr date
VCR makes noise when stopped
Will not AutoProgram active
channels correctly
Tape plays back in slow motion
Cannot select channels over 69
Tape already rewound.
Cable box was not turned on at time recording was to begin.
Program entered incorrectly (wrong channel or times).
Power interruption. Reset clock. See page 9.
Check to see if time and date are correct — including AM/PM.
Program exceeded tape's length or tape was not rewound beforehand.
VCR was not turned off at the time recording was to start.
No tape in VCR or cassette's safety tab broken off.
VCR ejects cassette when the end of the tape is reached during a timer
recording.
Clock was not set accurately (check AM/PM and date). See page 9.
Cassette with safety tab removed does not start to
play automatically
No status displays appear on the TV screen when
you change channels, etc.
• VCR is removing tape from heads. This is normal. The head cylinder inside
the VCR will continue to rotate for a few minutes after you put the VCR in
the stop mode.
• Check antenna connections.
• Check Tuning Mode; CABLE/ANTENNA feature. Seepages.
• Press PLAY to return to normal playback.
Cable channels over 69 can only be selected if Tuning Mode:
CABLE/ANTENNA feature is set to CABLE.
Set Auto Piay ON/OFF feature to ON. Details are on page 14.
Display off mode is selected. Press DISPLAY. See page 15.
31