RCA VG4038/ VG4039 - Manual (Page 30)

References
Location of Controls
Front Panel
CHANNEL'TRACKING (Up or Down)
Selects next higher or lower channel in the VCR's
channel memory.
Adjusts tracking when a tape is playing.
EJECT
Press when the VCR is stopped to eject the
cassette.
F.FWD (Fast Forward)
Fast forwards the tape when the VCR is stopped.
Searches the picture forward during playback.
PAUSE
Pauses action for viewing during playback.
Pauses recording to prevent recording of
unwanted scenes.
PLAY
Plays a tape.
POWER
Turns the VCR on or off.
REC»OTR
Starts VCR recording.
Used for one touch recording (OTR).
Remote Sensor
Receives signals from the remote control. Aim the
remote at this sensor with no objects between them.
REWIND
Rewinds the tape when the VCR is stopped.
Searches the picture in reverse during playback.
STOP
Stops the normal functions such as record,
playback, rewind, fast forward, or pause.
SPEED
Selects a recording speed (SP, LP, SLP).
TV«VCR
Switches the picture signal so that it either comes
from the VCR or the TV channel. See page 9.
Back Panel
OUTPUT
AUDIO VIDEO
INPUT
AUDIO VIDEO
IN FROM
ANTENNA
OUT TO TV
CHS 4 Switch
Selects the channel to which you will tune the TV
to see the VCR picture if you connect the VCR
using one of the basic hookups.
IN FROM ANTENNA Connector
Receives a signal from an antenna or cable system
when attached.
OUT TO TV Connector
Passes signal to TV using the cable supplied.
VIDEO INPUT and AUDIO INPUT Jacks
Receives signals from another component, like a
VCR or camcorder, when it is connected to these
jacks. Use INPUT on remote to select.
VIDEO OUTPUT and AUDIO OUTPUT Jacks
Sends signals from VCR to another component,
like a VCR or camcorder, when it is connected to
these jacks.
continued on next page
28