1cva147c rf output adapter, Vh54 cable transformer, Vh83 audioa^ideo cable – RCA CC643 User Manual
Page 67
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1CVA147C RF Output Adapter
This RF output adapter is used with a
coaxial RF cable, such as VH82 or VH90,
to connect your camcorder to a standard
TV (one without audio/video inputs) for
playback. If your antenna cable is the flat
twin-lead type attached by two screws,
you will also need a 300-to-75 ohm
transformer. If your TV has 300 ohm
antenna screw terminals, you will need an
optional 75-to-300 ohm transformer such
as VH54.
Coaxial RF Cables
VH82 (6-ft)
VH90 (12-ft)
VH54 Cable Transformer
This 75-to-300 ohm transformer is used to
connect a standard 75-ohm antenna cable
(such as VH82 or VH90) to the 300 ohm
screw terminals on a TV.
VH83 AudioA^ideo Cable
This six foot audio/video cable can be
used to connect the camcorder to a TV
monitor or VCR for tape playback or
copying tapes.
These RF cables are used with the RF
output adapter to connect your camcorder
to a standard TV (one without audio/
video input jacks) for playback. If your
TV has 300 ohm antenna screw terminals,
you will need an optional 75-to-300 ohm
transformer such as VH54. If your
antenna cable is the flat twin-lead type
attached by two screws, you will also
need an optional 300-to-75 ohm
transformer.
AH25 Y-Adapter
This Y-adapter allows you to connect your
camcorder’s mono audio cable to a stereo
TV or VCR.
All
specifications
and
descriptions
ol
accessories
arc subject to change without notice
68