RCA RP-9753 - Manual (Page 14)

I
USING THE COMPACT DISC PLAYER (continued)
D
CD
Selecting the Compact Disc Player
• To select the compact disc player, press the CD selector button. The
system will now operate with the CD player as the selected source of
sound, available for playback or recording.
OPEN/CLOSE
Loading and Removing Discs
The disc tray holds up to 3 compact discs, accommodating either 5-inch or
3-inch sizes. To load discs:
• Press the OPEN/CLOSE button. The disc tray slides out.
• Place discs on the tray, label side up.
• If necessary, press the DISC SELECT button to rotate the tray and provide
access to the rear compartment.
NOTE: Discs play in numerical sequence (first 1, then 2, then 3). If you
want to play the discs in a particular sequence, insert them in the desired
order.
NOTE: When you switch to POWER ON mode, the disc in the rear com­
partment (beneath the laser arm) is recognized as disc 1. If the rear com­
partment is empty, the CD player will recognize the first disc it accesses as
disc 1.
• Press OPEN/CLOSE to close the disc tray.
NOTE: To play a 3-inch (8 cm) disc, be sure to place it in the recessed inner
circle of the disc tray. Never place a standard 5-inch (12 cm) disc on top of a
3-inch disc.
1b remove discs:
• Press ■ (STOP) to stop play.
• Press the OPEN/CLOSE button. The disc tray slides out, allowing you to
remove discs.
• Press DISC SELECT to rotate the tray and provide access to the rear disc
compartment.
• Press OPEN/CLOSE to close the disc tray.
Playing Discs
• Load the discs you want to play, as described in the previous section.