Programming the order of tracks, Using the compact disc player icontlnued) – RCA RP-9753 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
USING THE COMPACT DISC PLAYER icontlnued)
Press TIME again to return to the original display of elapsed time since the
start of the current track.
Press STOP to stop play and show the total number of tracks and total
playing time of the fleeted disc.
Programming the Order of Tracks
You can program the CD player to play tracks in any desired order, using
discs in any sequence, and repeating tracks as often as you like. The pro
gram may contain up to 32 tracks. Fallow the steps explained here to enter
and play a program.
Preparing to Program Tracks:
1. Press CD to select the CD player as the source of sound.
2. Load all desired discs.
NOTE: When you enter program mode in step 4, the disc in the front left
compartment of the disc tray will be recognized as disc 1. To help keep
track of which disc is in which position, you may want to leave the disc
tray open while entering the program.
3. If a disc is playing, press ■ (STOP).
Entering and Playing the Program:
4. Press PROGRAM to enter program mode.
The display shows the “PROGRAM” message and indicates the program
step number as “01.” The display flashes disc 1 and shows its position in
the front left of the disc tray.
You can follow steps 6 and 7 to program tracks from disc 1 while the
display flashes disc 1.
5. Press DISC SELECT to select the disc that contains the desired track. The
display flashes the currently selected disc.