Cannondale SCALPEL 100 - Manual (Page 21)

10871.PDF
1
Cleaning
Use onLy a miLD soaP anD Water soLUtion. Clean water and a common dish washing liquid
will work best.
CoVer sensitiVe areas WitH a CLean PLastiC BaG. secured temporarily with a rubber band
or masking tape, a bag can prevent water damage to various bike components (bearings, seals,
fork / shock adjustment features).
sPray oFF BeFore WiPinG. to preserve the appearance of paint, finish, and decals, use an low
pressure water hose to first spray off heavy soils and dirt.
CAUTION
Do not power wash or spray water under high pressure to clean. Power washing will force
contaminants into parts where they will promote corrosion, immediately damage, or result
in accelerated wear.
Do not use compressed air to dry.
Do not use abrasive or harsh chemical cleaner/solvents which can damage the finish or
attack and destroy both the outside and internal parts.
When rinsing, avoid directing the spray directly at shock/fork adjusters or bearings.
Tightening Torques
ITEM N•m In•Lbs Loctite™
rear Derailleur Hanger Bolt 1.1 10 242 (blue)
rear shock mounting Bolts 13 115
shock Link Pivot Bolts 7 62 242 (blue)