Cannondale SCALPEL 100 - Manual (Page 7)

10871.PDF
7
HEADTUBE
HEADSET
PARTS or
ADAPTERS
AXLE
MAXIMUM FORK LENGTH
500 mm
Maximum Fork Length (500mm)
maximum Fork Length is an important frame safety testing specification. you must observe the
measurement when installing headset parts, headset adapters, installing and adjusting a fork,
and selecting replacement forks. in this manual, the number is also listed in the specifications
section.
HoW to measUre: 1. install headset and fork. 2. extend fork and measure the distance from
the bottom of the head tube to the center of the wheel axle. Do not measure from the bottom of
headset bearing cups or head tube adapters. the measurement mUst be taken from the bottom
of the head tube!!
WARNING
DO NOT EXCEED MAXIMUM FORK LENGTH
exceeding the maXimUm ForK LenGtH limit can overload the frame causing it to fail (break)
while riding.
YOU CAN BE SEVERELY INJURED, PARALYZED OR KILLED IN AN ACCIDENT
IF YOU IGNORE THIS WARNING.